Revision 1.0 Page 8 of 29
Warning
Please Note
The specifications of the product detailed on this
Set-Up Guide may change without notice. RDM
Ltd. shall not be liable for errors or for incidental
or consequential damages, directly and indirectly,
in connection with the furnishing, performance or
misuse of this product or document.
Ensure that all power is
switched off before
installing or maintaining
this product
Mercury 3 M & E Installation Guide
Setting up the controller
Access to the controller can be achieved by several ways;
Serial Communications Variant
Through the front mounted buttons of the display
Direct access by PC into the serial comms port. This requires a software package available on the RDM website.
Through legacy front end panels on 485 networks.
Through the RDM Data Manager.
Across an IP network (Current controller IP address required).
Ethernet Communications Variant
Through the front mounted buttons of the display.
Across an IP network (Current controller IP address required).
Through the Data Manager.
Setup through front buttons
Setup Function Menu (Common to all types)
Recommended set-up method
If you are not connecting to a network and want to set up the controller through the buttons we recommend you use the following order
from the function menu.
rtc. Real time clock (This will automatically synchronise on network systems)
a. Use the up or down buttons to scroll through the display until the display reads “rtc”
b. Press enter. The display will show “t-1”. press enter again
c. Scroll hours up or down (0 – 23) press enter
d. Use up button to select “t-2”, press enter
e. Scroll minutes up or down (0 – 59) press enter
f. Repeat for t-3 (seconds 0 – 59)
g. Repeat for t -4 (Days up to 31)
h. Repeat for t -5 (months up to 12)
i. Repeat for t -6 (Year up to 99)
j. Use up button to display “ESC”, press enter to display “rtc”
Time clock is now set
View Inputs / Outputs and
States
Set/view network configuration
Probe type and
Celsius/Fahrenheit option
Display whole units or
decimal
Set/view Clock (rtc = Real
Time Clock)
To enter setup mode, hold the Enter and Down
buttons together for approximately 3 seconds until
the message “Ent” appears on the display. Now
press the Enter button again to enter the function
menu. IO will be displayed. Scroll up or down to
go through the list.
(17 pagine)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale